Sony DVS-9000SF User Manual page 109

To invert the lighted area
Press [Light Invert], turning it on.
The lighted area is inverted.
To add color to the light source
Use the following procedure.
1
In the Light 1 menu, press [Light Color Adjust].
The Light Color Adjust menu appears.
2
In the <Fill Blending Mode> group, select how the light and image should
be blended.
Mix: Light as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface (diffuse reflection).
3
If you selected Mix, select the fill color in the <Fill Source> group.
Flat Color: A monochrome matte.
Hue Rotation: Color matte with a color that gradually varies.
4
According to the selection, set the following parameters.
• When you selected Flat Color
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Brilliancy
a) 100.00: The image beneath the light shines through.
• When you selected Hue Rotation
Knob Parameter
1 Luminance
2 Saturation
3 Speed
4 Brilliancy
a) –12.00 is a 360-degree rotation every second in the counterclockwise direction. +12.00 is
a 360-degree rotation every second in the clockwise direction.
b) 100.00: The image beneath the light shines through.
Adjustment
Luminance
Saturation
Hue
Brilliance of surface struck by light 0.00 to 100.00
Adjustment
Luminance
Saturation
Speed at which hue changes
Brilliance of surface struck by light 0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
a)
Setting values
0.00 to 100.00
0.00 to 100.00
a)
–12.00 to +12.00
b)
DME Special Effect Operations
109