Tally Generation Settings (Tally Enable Menu) - Sony DVS-9000SF User Manual

2
Referring to steps 2 and 3 in the preceding section "Making new wiring
settings," change the parameters as required. In this case, however, it is not
possible to specify multiple destinations in a single operation, and a single
"Destination Address" must be specified.
3
Press [Execute].
This updates the wiring settings.
Deleting wiring settings
Use the following procedure.
1
In the Router/Tally>Wiring menu, using either of the following methods,
select the wiring whose settings you want to delete.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
2
Press [Delete].
This deletes the selected wiring entry.
Sorting wiring settings
In the Router/Tally>Wiring menu, press [Sort].
Every time you press [Sort], the order of wiring settings changes in the
following order.
Destination level ordertDestination address ordertSource level order

Tally Generation Settings (Tally Enable Menu)

For settings relating to tally generation, use the Router/Tally>Tally Enable
menu. The settings are common to the parallel and serial tallies.
To display the Tally Enable menu
In the Engineering Setup menu, select VF6 'Router/Tally' and HF4 'Tally
Enable.'
The status area shows the tally generation settings.
Making new tally generation settings
Use the following procedure.
Setup Relating to Router Interface and Tally
343