Sony DVS-9000SF User Manual page 29

3
Set the parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob Parameter
1 H
2 V
3 All
• 16:9 mode
Knob Parameter
1 H
2 V
3 All
4
In the <Edge Mode> group, select the type of edge.
Light: effect of light striking the edge
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
5 All
Color: colored edges. When this is selected, set the following parameters
in the <Color Adjust> group.
• To set the density
Knob Parameter
1 Density
• To set the colors for each edge (Top, Left, Right, Bottom, All)
Knob Parameter
1 Luminance
Adjustment
Simultaneously adjust width of left
and right edges
Simultaneously adjust width of top
and bottom edges
Simultaneously adjust width of all
four edges
Adjustment
Simultaneously adjust width of left
and right edges
Simultaneously adjust width of top
and bottom edges
Simultaneously adjust width of all
four edges
Adjustment
Adjust luminance of top edge
Adjust luminance of left edge
Adjust luminance of right edge
Adjust luminance of bottom edge
Simultaneously adjust luminance of
all four edges
Adjustment
Adjust the color density
Adjustment
Luminance
Setting values
0.00 to 4.00
0.00 to 3.00
Value of H shown
Setting values
0.00 to 4.00
0.00 to 2.25
Value of H shown
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Value of Left shown
Setting values
0.00 to 100.00
Setting values
a)
0.00 to 100.00
DME Special Effect Operations
29