Sony DVS-9000SF User Manual page 32

2
3
32
DME Special Effect Operations
Press [Art Edge], turning it on.
This enables art edges, and you can now use the knobs to adjust the
parameters.
Note
The Defocus, Blur, Key Border, and Glow effects cannot be applied to the
Art Edge sections.
Set the parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob Parameter Adjustment
1 H Simultaneously adjust width of left
and right edges
2 V Simultaneously adjust width of top
and bottom edges
3 All Simultaneously adjust width of all
four edges
5 Density Density of edges
Knob Parameter Adjustment
1 Top Width of top edge
2 Left Width of left edge
3 Right Width of right edge
4 Bottom Width of bottom edge
5 Density Density of edges
• 16:9 mode
Knob Parameter Adjustment
1 H Simultaneously adjust width of left
and right edges
2 V Simultaneously adjust width of top
and bottom edges
3 All Simultaneously adjust width of all
four edges
Parameter group [1/2]
Parameter group [2/2]
Parameter group [1/2]
Setting values
Value of Left shown
Value of Top shown
Value of Left shown
0.00 to 100.00
Setting values
0.00 to 6.00
0.00 to 8.00
0.00 to 8.00
0.00 to 6.00
0.00 to 100.00
Setting values
Value of Left shown
Value of Top shown
Value of Left shown