Sony DVS-9000SF User Manual page 241

4
To carry out installation, press [Execute].
A confirmation message appears.
5
Select [Yes].
This installs the software.
Displaying installation details
In the System>Install/Unit Config menu, press [Detail Information].
This accesses the Detail Information menu, and displays the detailed
information on the software and firmware installed in the currently selected
device.
Making settings required to use the software
BZS-9250
BZS-9420
BZS-9471
BZDM-9050
To use the software listed above, you are required to enter an install key which
validates the software. (If the software has been factory installed, the install key
is not required.)
For the method of obtaining an install key, contact your Sony representative.
To obtain a key, you may be required to submit the unique device ID of the
switcher you are using. You can check the unique device ID in the Install/Unit
Config menu of the switcher, using the following procedure.
To display the unique device ID
To check the unique device ID, carry out the following procedure.
1
In the System>Install/Unit Config menu, use either of the following
methods to select the device for which you want to register the license.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
2
Press [License].
The License menu appears as follows.
Simple P/P software
Color corrector software
Texture lighting software (for BKDS-9470)
Texture lighting software (for MVE-9000)
Setup for the Whole System
241