2
Adjust the following parameters.
Knob
1
2
3
Setting the center point of the flex shadow
Use the following procedure.
1
In the Flex Shadow menu, press [Axis Loc], turning it on.
2
Adjust the following parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob
1
2
• 16:9 mode
Knob
1
2
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Parameter
Adjustment
Axis Loc H
Move the shadow center axis
horizontally
Axis Loc V
Move the shadow center axis
vertically
Parameter
Adjustment
Axis Loc H
Move the shadow center axis
horizontally
Axis Loc V
Move the shadow center axis
vertically
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
–8.00 to +8.00
–6.00 to +6.00
Setting values
–8.00 to +8.00
–4.50 to +4.50
DME Special Effect Operations
41