Copying Files - Sony DVS-9000SF User Manual

5
Press [T Load].
This loads the contents of the selected file from the specified location.

Copying Files

You can copy files either within a directory or between directories, on the hard
disk, memory card, or remote panel.
As an example, to copy a snapshot file from memory card to remote panel 1,
use the following procedure.
1
In the File menu, select VF3 'Snapshot' and HF1 'Snapshot.'
2
In the device selection area on the left, specify the location of the file to be
copied (in this case [Memory Card] and a directory). (See page 356.)
3
In the device selection area on the right, select the destination of the copied
file (in this case [Remote PNL1] and a directory).
4
Using any of the following methods, select the source and destination files.
• To select all files within the list, press [ALL] below the list.
• To select multiple files, turn the knobs to select in the following ranges.
Knob Parameter
1
2
3
• To select a single file, press the arrow keys to scroll the reverse video
cursor, or press directly on the list in the status area.
5
Press [t Copy].
This copies the selected file or files to the specified destination.
If there is already data in the specified location, a confirmation message
appears.
• Select "Yes" to overwrite the data.
• Select "No" to cancel copying all of the files.
Adjustment
List L Select the first copy source file
List R Select the first destination file
Num Number to be selected
Setting values
1 to 99
1 to 99
1 to 99
Operations on Individual Files
359