Sony DVS-9000SF User Manual page 318

Setting an illegal color limit for matte signals
To enable the illegal color limiter for the signals generated by the DME internal
matte generator, press [Matte Illeg Col Limit] for DME1 in the DME>Input
menu, turning it on.
Making MVE-9000 system phase adjustment
To adjust the MVE-9000 reference phase, use the following procedure.
1
2
Setting the monitor output
To set the signals output from the four MVE-9000 monitor output connectors,
use the following procedure.
1
2
3
4
5
6
318
Setup Relating to DME
Press [Unity] in the <Crop> group.
Press [System Phase].
Set the following parameters.
Knob Parameter Adjustment
1 DME1 DME1 system phase adjustment
Phase
2 DME2 DME2 system phase adjustment
Phase
In the Engineering Setup menu, select VF4 'DME' and HF3 'Output.'
The Output menu appears.
Press [Monitor Output].
The Monitor Output menu appears.
In the <Select> group, select the DME to which the setting applies.
DME1: Select DME1.
DME2: Select DME2.
In the list on the left of the status area, press directly on the monitor output
for which you want to make setting.
In the list on the right of the status area, press directly on the signal you
want to output.
Press [Set].
Setting values
–32.00 to +96.00
–32.00 to +96.00