Sony DVS-9000SF User Manual page 165

• To move the edit point to a keyframe specified by number, press the [GO TO
KF/TC] button turning its LED on, then enter the keyframe number with the
numeric keypad in the numeric keypad control block, and press the [ENTER]
button to confirm.
• To move the edit point to a specified timecode, holding the [SHIFT] button,
press the [GO TO KF/TC] button turning its LED on, then enter the timecode
value with the numeric keypad in the numeric keypad control block and press
the [ENTER] button to confirm.
To enter a difference value
When moving to a point specified with the [GO TO KF/TC] button, you can
also enter the difference from the current keyframe number or timecode value.
Press the numeric keypad +/– button, and enter the difference, then press the
[TRIM] button. Each time you press the +/– button, it toggles between plus (+)
and minus (–).
Specifying the Region and Edit Points
165