Knob
1
2
a) See "Global Effects" in Chapter 1 (Volume 1).
Mixing pairwise the images of channels 1 and 2, and channels 3
and 4
Use the following procedure.
1
In the Combiner Priority menu, press [Combiner1 Mix], turning it on.
2
Adjust the following parameters.
Knob
1
a) See "Global Effects" in Chapter 1 (Volume 1).
3
Press [Combiner2 Mix], turning it on.
4
Adjust the following parameters.
Knob
1
a) See "Global Effects" in Chapter 1 (Volume 1).
Automatically setting the priority of overlapping images
To set the system so that the priority of overlapping images is automatically
determined by their position on the z-axis, in the Combiner Priority menu,
press [Auto], turning it on.
Note
It is not possible to cross images. If an image is rotated, the priority is
determined by the position on the z-axis of the center of the image.
Parameter
Adjustment
Mix1
Mix degree for mix of
channel 1 with result of
Mix2
Mix2
Mix degree for channels
2 and 3
Parameter
Adjustment
Mix1
Mix degree for channels
1 and 2
Parameter
Adjustment
Mix2
Mix degree for channels
2 and 3
Setting values
a)
0.00 to 100.00
a)
0.00 to 100.00
Setting values
a)
0.00 to 100.00
Setting values
a)
0.00 to 100.00
Global Effect Operations
119