Sony DVS-9000SF User Manual page 168

3
4
Modifying more than one keyframe simultaneously
You can modify a number of keyframes simultaneously. There are three
different cases for this operation.
• Modifying from the edit point to a particular keyframe
• Modifying all keyframes in the effect
• Modifying the keyframes in a specified range
The different procedures for these cases are now described.
To modify from the edit point to a particular keyframe
Use the following procedure.
1
2
3
4
5
6
To modify the keyframes in a specified range
Use the following procedure.
168
Creating and Editing Keyframes
Using image transformations or adding special effects, modify the
keyframe.
Press the [MOD] button.
This modifies the keyframe.
Press the [EDIT ENBL] button, turning it on.
Stop the effect at the first keyframe of the range to be modified.
Carry out the necessary modifications.
Press the [FROM TO] button, turning it on.
The display in the numeric keypad control block shows the current
keyframe number, followed by "TO."
Enter the number of the last keyframe to be modified from the numeric
keypad control block and press the [ENTER] button to confirm.
Press the [MOD] button. Alternatively, hold down the [SHIFT] button and
press the [MOD] button.
For the difference in the result, see "Differences in the changes when a
number of keyframes are modified" (page 169).
This makes the modification simultaneously to all keyframes from the edit
point to the specified keyframe.