Signal Output Settings (Output Menu) - Sony DVS-9000SF User Manual

4
Making video process settings
Use the following procedure.
1
2
3
4
Enabling the illegal color limiter
To enable the illegal color limiter for the signals generated by the switcher
internal matte generator, press [Matte Illeg Col Limit] in the Switcher>Input
menu, turning it on.

Signal Output Settings (Output Menu)

For setup relating to signal outputs, use the Switcher>Output menu.
294
Setup Relating to Switcher Processor
To enable through mode, press [Through Mode], turning it on.
In the Switcher>Input menu, press [Video Process].
The Video Process menu appears.
The status area shows the source number, source name, and video process
adjustment settings.
Using any of the following methods, select the input signal to which the
settings apply.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
6 Src No Input signal selection
Press [Video Process], turning it on.
Adjust the following parameters.
Knob Parameter Adjustment
1 Video Gain Video signal gain
2 Y Gain Y signal gain
3 C Gain Chrominance signal gain
4 Hue Delay Hue delay
5 Black Level Black level
To set the parameter settings to their defaults, press [Unity].
Setting values
1 to 80
Setting values
–200.00 to +200.00
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00
–7.30 to +109.58