Overall Color Corrector Operations
Enabling color corrector
To enable the functions of color corrector 1, for example, use the following
procedure.
1
2
Returning all color corrector settings to their defaults
Use the following procedure.
1
2
Copy and Swap Operations
Copying color corrector data
Use the following procedure.
1
2
390
Overall Color Corrector Operations
In the CCR menu, press VF1 'CCR1' and any HF.
In the <CCR> group, press [CCR], turning it on.
This enables the functions of color corrector 1.
In the <CCR> group, press [Unity].
A confirmation message appears.
Press [Yes].
This returns all color corrector settings to their defaults, whether [CCR] is
on or off.
In the CCR menu, press VF3 'Copy/Swap.'
The Copy/Swap menu appears.
The status area shows a copy source list on the left and a copy destination
list on the right.
Using any of the following methods, select the copy source data and copy
destination data.
• Press directly on the list appearing in the status area.