Snapshot Operations in the Menus
You can also set snapshot or key snapshot attributes in the Snapshot menu,
which also displays the status of the registers. To access the Snapshot menu,
press the top menu selection button [SNAPSHOT] in the menu control block.
In the Snapshot menu, as well as setting snapshot attributes, you can carry out
editing operations on snapshots, including copy and delete.
See "Snapshot Register Editing" (page 215).
Setting Snapshot Attributes
Applying snapshot attributes
To apply an attribute to a snapshot, use the following procedure.
1
2
3
4
210
Snapshot Operations in the Menus
In the Snapshot menu, press VF2 'Snapshot' and HF1 'Attribute.'
The Snapshot>Attribute menu appears.
The status area shows the region names, register numbers, and the status
and attributes set.
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible. To select all regions, press [ALL]
Press [OK].
The selected region name appears in the upper part of the list.
Using either of the following methods, select the register.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob
Parameter
1
Register
2
Num
• To select all registers, press [ALL].
Adjustment
Register number
Select number of registers
Setting values
1 to 99
1 to 99