Sony DVS-9000SF User Manual page 346

3
4
Modifying tally copy settings
Use the following procedure.
1
2
3
Deleting tally copy settings
Use the following procedure.
1
346
Setup Relating to Router Interface and Tally
Knob Parameter
2 Copy From (To)
Specify the copy-to source address.
Knob Parameter
3 Copy To (From)
4 Copy To (To)
Press [Execute].
This makes the tally copy setting according to the specifications in steps 2
and 3.
In the Router/Tally>Tally Copy menu, press [Modify].
The Modify menu appears.
Use the knobs to select the copy source and copy destination.
Knob Parameter Adjustment
1 Copy From Copy-from source
2 Copy To Copy-to source
Press [Execute].
This updates the tally copy settings.
In the Router/Tally>Tally Copy menu, using either of the following
methods, select the tally copy whose settings you want to delete.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Copy No Tally copy setting selection for deletion
Adjustment
Copy-from source end address
Adjustment
Copy-to source (start) address
Copy-to source (end) address
Setting values
1 to 1024
Setting values
1 to 1024
1 to 1024
Setting values
1 to 1024
1 to 1024
Setting values
1 to ...