Sony DVS-9000SF User Manual page 124

Applying the Drop Shadow effect
Use the following procedure.
1
2
3
4
5
124
Global Effect Operations
In the Global Effect>Ch1 - Ch4 menu, select HF3 'Shadow.'
The Shadow menu appears.
Depending on the selected channels, the valid channel block buttons differ
in the <Ch1>, <Ch2>, and <Ch3> blocks.
The explanation of this procedure uses the example of <Ch1> block.
Press [Ch1 Shadow], turning it on.
The Drop Shadow effect is enabled, and channel 2 becomes the channel for
the shadow to the image. You can adjust the position and density of the
shadow with the knobs.
Note
The flex shadow function cannot be enabled when Drop Shadow is
enabled.
Set the parameters.
Knob Parameter
1 Position H
2 Position V
3 Density
In the <Ch1 Shadow Source> group, select the shadow source signal.
Video: Select Ch2 video input as the shadow.
Flat Color: Select a matte color as the shadow.
When you select Flat Color in step 4, adjust the parameters.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
Adjustment
Horizontal shadow position
Vertical shadow position
Density of shadow
Adjustment
Luminance
Saturation
Hue
Setting values
–8.00 to +8.00
–8.00 to +8.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00