Interfacing With External Devices (Device Interface Menu) - Sony DVS-9000SF User Manual

The selection is reflected in the monitor output.
Interfacing With External Devices (Device Interface
Menu)
To carry out setup relating to DME connections with external devices, display
the DME>Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF4 'DME' and HF4 'Device
Interface.'
In the following, the settings for DME1 are explained. (It is not necessary to
make settings for DME2.)
Setting the editor protocol
In the <DME1 Editor Protocol> group of the DME>Device Interface menu,
press the following buttons to make the setting.
DME: Control by DME protocol through the editor port.
VTR: Control by VTR protocol through the editor port.
Making editor port settings
In the <DME1 Editor Port Setting> group of the DME>Device Interface menu,
press either of the following to select the way in which the editor ports are used.
Common: Control all of channels 1 to 4 through Editor port 1.
Independ: Control channels 1 to 4 individually through Editor ports 1 to 4.
Making DME GPI input settings
Use the following procedure.
1
In the DME>Device Interface menu, press [DME1 GPI Input].
The DME1 GPI Input menu appears.
2
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob
1
Parameter Adjustment
Port Input port selection
Setting values
1 to 8
319
Setup Relating to DME