Interfacing With External Devices (Device Interface Menu) - Sony DVS-9000SF User Manual

Interfacing With External Devices (Device Interface
Menu)
To carry out setup relating to connections with external devices, display the
Panel>Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF2 'Panel' and HF5 'Device
Interface.'
Making control panel GPI input settings
Use the following procedure.
1
2
3
4
276
Setup Relating to Operations From the Control Panel
In the Panel>Device Interface menu, press [GPI Input].
The GPI Input menu appears.
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Port
In the <Trigger Type> group, select the trigger type.
(Rising Edge): Apply the trigger on a rising edge of an input pulse.
(Falling Edge): Apply the trigger on a falling edge of an input
pulse.
: Apply the trigger on a change in the polarity of the input signal.
(Level): Carry out the specified operation when the input is low or
high.
No Operation: Apply no trigger on an input pulse.
In the <Target> group, select the action block.
M/E-1, M/E-2, M/E-3, P/P: Set the action for one of the operating banks.
Common/Setup: Set an action for something other than the above, or a
setup action.
Adjustment
Port selection
Setting values
1 to 8