Operation Settings (Operation Menu) - Sony DVS-9000SF User Manual

4

Operation Settings (Operation Menu)

To make settings relating to panel operation, use the Panel>Operation menu.
To display the Operation menu
In the Engineering Setup menu, select VF2 'Panel' and HF6 'Operation.'
The status area shows the items that can be set and a list of the settings.
Setting the on-air tally
To set the high tally state reflected on the control panel, select any of the
following in the <Button Tally> group.
System: The overall system tally state is reflected on the control panel.
Independ: The tally state of the switcher only is reflected on the control panel.
Setting the transition rate display mode
To determine whether to display transition rate values in menus and on the
control panel in frames or as timecode values, select one of the following in the
<Trans Rate Display> group.
Frame: display in frames.
Timecode: display as timecode (SS:FF).
Making settings relating to effects
To make settings relating to the functions used when carrying out keyframe
effect operations, use the following procedure.
1
2
282
Setup Relating to Operations From the Control Panel
Repeat steps 1 to 3 as required to select other devices for sharing the file
list.
In the Panel>Operation menu, press [Effect Mode].
The Effect Mode menu appears.
The status area shows a list of the items with their settings.
Make the following settings as required.
Effect recall mode: To select the state of the first keyframe when an effect
is recalled, select [Recall] (the first keyframe is not recalled) or
[Recall&Rewind] (the first keyframe is recalled) in the <Recall
Mode> group.
Automatically turning [EDIT ENBL] off: When an effect is recalled
with the [EDIT ENBL] button on, to automatically turn this button off,
disabling keyframe editing, turn [Edit Enable Auto Off] on.