Sony DVS-9000SF User Manual page 274

Command name
Pre Macro
Post Macro
Macro Take
Macro Auto Ins
Macro AT with Rate
Macro AT with A/B Bus When registering an auto transition
Macro TL with Region
DME Override
DME Graphic
a) For the safe title on/off commands (from ME1 PGM1 ST-ME1 PGM4 ST to AUX1 ST-AUX48
Assigning a menu shortcut to a memory recall button in the
utility/shotbox control block
Use the following procedure.
1
2
274
Setup Relating to Operations From the Control Panel
a) Function
Set macro attachment in pre macro
mode
Set macro attachment in post macro
mode
Macro execution
Macro auto insert mode on/off
When registering an auto transition
macro event, on/off setting of mode to
save transition rate
macro event for the transition control
block, on/off setting of mode to save A/
B Bus cross-point settings
When registering a timeline macro
event, on/off setting of mode to save
applicable region
DME override on/off
DME graphics on/off (Applies to
graphics for channel selected in device
control block)
ST), the name of the assigned output signal is shown.
Referring to the procedure up to step 3 in the previous item, select [Menu
Shortcut].
The memory recall buttons in the utility/shotbox control block flash
orange.
Using any of the following methods, display the menu to which you want
to make a shortcut.
• In the menu control block, press the relevant top menu selection button,
then select VF and HF.
• Press the menu page number button in the upper left corner of the menu
screen, then enter a menu number from the numeric keypad window.
• Press a particular control panel button twice in rapid succession.
Button status
Lit green Lit orange
Can be set only When the function
while pressed (lit) is assigned
Can be set only When the function
while pressed (lit) is assigned
During execution When the function
is assigned
On Off
On Off
On Off
On Off
On Off
On Off