Sony DVS-9000SF User Manual page 278

6
Carrying out level settings
To set the low level and high level, first set the trigger type to "Level," then use
the following procedure.
1
2
3
Making control panel GPI output settings
Use the following procedure.
1
2
278
Setup Relating to Operations From the Control Panel
Press [Action Set] to confirm the action selection.
The selected setting appears in the status area.
In the Panel>Device Interface menu, select the action to be set, and press
[H/L Set].
The H/L Set menu appears.
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 No
To apply the selection made in step 2 when the input is the GPI high level,
press [H Set]. To apply the selection made in step 2 when the input is low,
press [L Set].
This confirms the setting, which appears in the status area.
In the Panel>Device Interface menu, press [GPI Output].
The GPI Output menu appears.
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Port No
Adjustment
Signal format/screen
aspect ratio selection
Adjustment
Port selection
Setting values
1 to ...
Setting values
1 to 8