A • Specifications; Technical Specification; Electrical Specification; Voltage Supply Requirements - GE SBC330 3U VPX Hardware Reference Manual

A • Specifications
A.1 Technical Specification
Table A-1
Features
Integrated Host
Processor
Main Memory
Flash Memory
On-board Interconnect
Ethernet Interfaces
Serial ports
USB
Serial ATA
DMA Controllers
Timers
Watchdog Timer
Real-Time Clock
Elapsed Time Indicator
Discrete Digital I/O
COP (JTAG) Interface
A.2 Electrical Specification
Publication No. SBC330-0HH/3
Details
Freescale MPC8641D
Up to 2 GBytes DDR2 SDRAM with
ECC
Up to 512 MBytes
256 MBytes by default
PCI Express 1.0 - 2.5Gbit/S
2x 10/100/1000BaseT ports
2x RS232 with hardware flow
control
4 ports
Up to 2 Channels
4
8 x 31-bit timers
Two 16-bit timers, each with
multiple clock options
Time Of Day/Calendar
Quarter second resolution
Up to 8-bits, TTL-compatible
On-board header with adapter to
standard connector
A.2.1 Voltage supply requirements
Only the VPX VS3 +5V supply (VCC) is required, and must remain within the
specified as defined below. The voltage rail is expected to rise monotonically and
reach 90% of its full value within a maximum of 50 mS.
If the 5V rail falls outside of these specifications at power‐up, then the SBC330
may fail to start.
Comments
Containing two e600 PowerPC processing cores @
1.5 GHz
Dual memory controllers running at 200, 266, or
300 MHz
Up to 16 MBytes allocated to Boot Flash and the rest to
User Flash. Advanced sector protection features
High bandwidth serial-interconnect. Non-blocking
switch architecture
Two Gigabit Ethernet ports
MPC8641D provides COM1 & COM2 debug ports
USB 2.0 capable
Supports speeds of up to 3.0 Gbps
Available in the MPC8641D for efficiently moving large
blocks of data
Provided by the MPC8641D. Programmable frequency
with up to 15 ns resolution. Ability to cascade to form
larger timers
Programmable interrupt and reset thresholds
1 second resolution. Standby power may be connected
from the VBAT pin to maintain data during power down
Logs the total accumulated time the board has been
powered, and the number of power cycles
Able to generate edge- or level-triggered interrupts. Can
be configured as open-drain outputs, using special
firmware
SBC330EMU adapter available for development
Specifications 85