Connector Pinout; P0 Connector Pinout; J0 (Backplane) Connector Pinout - GE SBC330 3U VPX Hardware Reference Manual

9.2 Connector Pinout

Table 9-1 P0 Pinout
Pin A B
1 NC NC
2 NC NC
3 VCC VCC
4 P0_NVMRO P0_SYSRESET~ GND
5 SM(1) SM(0)
6 GA(0) ~ GA(1) ~
7 JTAG_TRST~ JTAG_TMS
8 GND BUS_P
Table 9-2 J0 Pinout
Pin A B
1
NOT USED NOT USED
2
NOT USED NOT USED
3
VCC VCC
4
GND P0_NVMRO
5
GND SM(1)
6
GND GA(0)~
7
JTAG_TRST~ JTAG_TMS
8
GND GND
78 SBC330 3U VPX Single Board Computer
CAUTION
The pinout for SBC330 P1 and P2 has changed between Rev1/2 and Rev3. For information
regarding the pinout for Rev1/2 boards please contact GEIP.

9.2.1 P0 connector pinout

C
NC
NC
VCC
GND
GND
GND
BUS_N

9.2.2 J0 (backplane) connector pinout

C
NOT USED
NOT USED
VCC
P0_SYSRESET~
SM(0)
GA(1)~
GND
BUS_P
NOTE
The Rear Transition Module for the SBC330 is the SBC330RTM. It provides accessibility to the
backplane signals and a means for connecting to other equipment – see
Manual for more details.
D E
NC NC
NC NC
NC VCC
NC GND
P3V3_AUX GND
NC GND
JTAG_TDI JTAG_TDO
GND BP_CLK_P
D E F
NOT USED NOT USED NOT USED
NOT USED NOT USED NOT USED
VCC NOT USED VCC
GND NOT USED GND
GND P3V3_AUX GND
GND NOT USED GND
GND JTAG_TDI JTAG_TDO
BUS_N GND GND
F G
NC NC
NC NC
VCC VCC
SM(3) SM(2)
GA(4) ~ GAP~
GA(2) ~ GA(3)~
GND JTAG_TCK
BP_CLK_N GND
G H I
NOT USED NOT USED NOT USED
NOT USED NOT USED NOT USED
VCC VCC VCC
SM(3) SM(2) GND
GA(4)~ GAP~ GND
GA(2)~ GA(3)~ GND
GND GND JTAG_TCK
BP_CLK_P BP_CLK_N GND
SBC330RTM Product
Publication No. SBC330-0HH/3