Specifications - GE C2K Hardware Reference Manual

1.2 Specifications

Physical Description
Form Factor:
Height:
Depth:
Weight
C-style:
N-style:
Power Requirements
+5V, +3.3V, +12V:
±12V:
Power Consumption
Peak:
Idle:
Inrush:
BATT+:
Total:
* Measured at VxWorks
Temperature (operating)
C-style:
N-style:
Temperature (storage)
C-style:
N-style:
Relative Humidity - @ 40° C (non-condensing)
C-style:
N-style:
Shock (half-sine)
C-style:
N-style:
Vibration (random)
C-style:
N-style:
C2K User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6U per PICMG 2.16
233.20 ± 0.15 mm (9.1811 ± 0.0059 in.)
159.85 ± 0.15 mm (6.2933 ± 0.0059 in.)
TBD
TBD
Required from the cPCI backplane
NOTE:
The +12V requires 10mA for the Hot Swap circuitry which is
otherwise not used by the board.
As required by installed PMC modules
+5V +3.3V
5.7A 4.10A
TBD TBD
2.0A @ 120µs 2.0A @ 120µs
10µA
42W
®
prompt
0° C to 70° C (ambient)
-40° C to 85° C
-40° C to 85° C
-55° C to 105° C
5–95% @ 40° C
5–95% @ 40° C
20g peak / 6ms (3 axes, up & down, 3 hits / direction)
40g peak / 11ms (3 axes, up & down, 3 hits / direction),
100g peak / 6ms (3 axes, up & down, 3 hits / direction)
0.04g2 / Hz @ 5-100Hz (2g rms), 60 min. / axis
0.1g2 / Hz @ 5-2000Hz (12g rms), 60 min. / axis
Introduction
1-3