Programming Ptz Tours - Honeywell Performance HDZP252DI User Manual

Programming PTZ Tours

You can program up to eight tours that can consist of between 2 and 32 preset points in each
tour.
Programming a Tour
1.
2.
3.
Note You can also go to a preset on the Live View page of the PTZ web client interface.
See PTZ Functions: Preset on page 26
Note You must define the presets before you can program a preset tour.
See Programming a Preset Point on page 79
programming preset points.
Figure 6-2 Tour Configuration Interface

Navigate to Setup PTZ
Under the Tour No. and Tour Name table (upper table), click Add. A new tour line is added
to the table. Make sure that the tour line for the tour you want to program is selected
before moving on to the next step.
Under the Preset table (lower table), click Add to add a preset to the tour. Continue to click
Add until you have the number of presets that will be needed for the tour (up to 32).
If an added preset line is not needed, click the Delete icon (
you want to delete.
for more information.
 
Function Tour (see
PTZ Functions | 81
for more information on
Figure 6-2).
) that is next to the preset
800-22757 - A - 02/2017