Figure 5-4 Add A Preset Patrol - Honeywell 60 Series Configuration Manual

Adding a Preset Patrol

Figure 5-4 Add A Preset Patrol

1. Enter a name for the preset patrol.
2. Select a patrol speed form the dropdown list.
3. Select a patrol direction from the dropdown list.
4. Click on the screen or operate the PTZ panel to adjust the shooting area to the desired
position.
5. Select the Pan/Tilt/Zoom/Focus speed.
6. Enter a name for the preset. Click ADD and the preset will be listed in the User preset
locations list. Repeat the above steps to add more preset locations. To remove a preset,
select it and click REMOVE.
7. Select the preset locations in the preset locations list, and click
8. The selected preset locations will be displayed in the Patrol locations list. The default
dwell time is 5 seconds. Set the Dwelling time for the preset location during an auto
patrol.
Configuring PTZ Settings
.
39