Pairing Your Cisco Spa 525G2 With A Bluetooth-Enabled Mobile Phone - Cisco SPA 525G User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SPCP)
Pairing Your Cisco SPA 525G2 with a Bluetooth-Enabled
Mobile Phone
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1. 1
Not all mobile phones support these functions. See the list of Bluetooth-enabled
mobile phones supported with the Cisco SPA 525G2 that is posted at the Cisco
support community at http://www.cisco.com/go/smallbizsupport, and also consult
the latest Cisco SPA 525G2 release notes available at cisco.com.
To pair your Cisco SPA 525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA 525G2, or from your mobile phone.
Initiating Pairing from the Cisco SPA 525G2
Enable Bluetooth as described in the
525G2)" section on page
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
•
Handsfree—Your Cisco SPA 525G2 will operate as a handsfree device with
a Bluetooth-enabled mobile phone.
•
Both—Your Cisco SPA 525G2 will operate with your Bluetooth-enabled
mobile phone or operate with a Bluetooth headset. (See
Bluetooth Headsets" section on page 18
headsets.)
Your Cisco SPA 525G2 will connect to only one device at a time (either
NOTE
the Bluetooth headset or the Bluetooth-enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA 525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
"Enabling Bluetooth (Cisco SPA 525G/
52.
"Connecting
for more information on Bluetooth
4
53