Pairing Your Cisco Spa 525G2 With A Bluetooth-Enabled Mobile Phone; Initiating Pairing From The Cisco Spa 525G2 - Cisco SPA 525G2 Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Bluetooth (Cisco SPA 525G/525G2 only)
STEP 10
STEP 11
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Scroll to Connect Automatically and press the Right Arrow key to turn to On.
Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.
Pairing Your Cisco SPA 525G2 with a Bluetooth-Enabled
Mobile Phone
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1. 1
Make sure your mobile phone provides support for the above profiles. Cisco
provides a reference list of Bluetooth-enabled mobile phones supported with the
Cisco SPA 525G2. See the Cisco support community at
go/smallbizsupport and also consult the latest Cisco SPA 525G2 release notes,
available at cisco.com.
For more detailed instructions, including screen shots, see the
Business SPA 525/525G2 User Guide (SIP)
Manager Express for the Cisco Small Business IP Phone SPA 525G/525G2 (SPCP)
User Guide .
To pair your Cisco SPA 525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA 525G2, or from your mobile phone.

Initiating Pairing from the Cisco SPA 525G2

Enable Bluetooth as described in the
525G2)" section on page
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
or the
"Enabling Bluetooth (Cisco SPA 525G/
66.
http://www.cisco.com/
Cisco Small
Cisco Unified Communications
3
69