Mitsubishi Electric MELDAS C6 Parameter Manual page 36

# Items
1121 edlk_c Edit lock C
1122 pglk_c Program
(PR) display lock
1123 origin Origin zero
inhibition
1124 ofsfix Fix tool wear
compen-
sation
number
1125 real_f Actual
feedrate
display
1126 PB_G90
1127 DPRINT DPRINT
alignment
5. Base Specifications Parameters
Details
Specify whether to prohibit editing of program Nos.
9000 to 9999.
The display and search of program Nos. 9000 to 9999
can be prohibited. Specify whether to prohibit display
and search.
0: Display and search is possible
1: Program details are not displayed
2: Program details are not displayed‚ and operation
search is prohibited.
The program details will not be displayed‚ but the
program No. and sequence No. will display in the
prohibited state.
Select whether to use the origin zero function.
Specify whether to automatically increment the offset
No. by 1 with the input or to display the No. as it is in
the setting on the tool offset screen.
0: Increment the # No. by 1 when the input key is
pressed. (Same as general parameters)
1: # No. does not change even if input key is
pressed.
When making settings in sequence‚ 0 is handier.
When changing and setting repeatedly while adjusting
one offset value‚ 1 is handier
Specify the feedrate display on the monitor screen.
Not used.
Specify the alignment for printing out with the DPRINT
function.
0: No alignment‚ data is printed with left
justification.
1: Align the minimum digit and output.
30
Get other manuals https://www.bkmanuals.com
Setting range (unit)
0: Editing
possible
1: Editing
prohibited
0 to 2
0: Use
1: Do not use
0/1
0: Command
speed
1: Real move-
ment feedrate
0
0/1