Mitsubishi Electric MELDAS C6 Parameter Manual page 282

9.3 Example in Using a Linear Axis as the Base Axis
(3) When the range compensated is only the negative range:
Division point number
Compensation Incremental
amount Absolute
If the machine position exceeds "mdvno"‚ the compensation will be based on compensation amount at
"mdvno".
(4) When compensation is executed in a range that contains no reference point:
Division point number
Compensation Incremental
amount Absolute
In this case‚ the compensation is executed in the range from "mdvno" to "pdvno". This setting rule
applies also when the compensation is executed in a range which contains negative machine
positions and no reference point.
9. Machine Error Compensation
#4125 #4126 #4127
−2
2 6
−2 −4 −2
#4135 #4136 #4137
−2
−2
276
Get other manuals https://www.bkmanuals.com
#4128 #4129 #4130
−6
2 0
4 6 6
#4138 #4139 #4140
−2
6 2
−4
2 4
rdvno 4130
mdvno 4125
pdvno 4130
rdvno 4134
mdvno 4136
pdvno 4140