Mitsubishi Electric MELDAS C6 Parameter Manual page 271

No. Items
3453 SP253 DA1NO
3454 SP254 DA2NO
3455 SP255 DA1MPY DA output
3456 SP256 DA2MPY DA output
3457 SP257 RPM
(PR)
to to
SP320 BSD
3520
(PR)
3521 SP321 RPML
(PR)
to to
SP384 BSDL
3584
(PR)
8. Spindle Parameters
8.4 MDS-C1-SPM
D/A output Set the output data number for channel 1
channel 1 of the D/A output function.
data number When set to "0", the output is
speedometer.
Refer to "9.4 (1) For D/A output functions".
D/A output Set the output data number for channel 2
channel 2 of the D/A output function.
data number When set to "0", the output is load meter.
Refer to "9.4 (1) For D/A output functions".
Set the data magnification for channel 1 of
channel 1 the D/A output function.
magnifica- The output magnification is the setting
tion value divided by 256.
When set to "0", the output magnification
becomes 1-fold, in the same manner as
when "256" is set.
Refer to "9.4 (1) For D/A output functions".
Set the data magnification for channel 2 of
channel 2 the D/A output function.
magnifica- The output magnification is the setting
tion value divided by 256.
When set to "0", the output magnification
becomes 1-fold, in the same manner as
when "256" is set.
Refer to "9.4 (1) For D/A output functions".
Motor This parameter is valid only in the
constant following two conditional cases:
(H coil)
(a) In case that SP034 (SFNC2) bit0=1
and SP034 (SFNC2) bit2=0
Set the motor constants when using a
special motor, not described in the
SP040 (MTYP) explanation and when
not using the coil changeover motor.
(b) In case that SP034 (SFNC2) bit0=1
and SP034 (SFNC2) bit2=1
Set the motor constant of the H coil of
the coil changeover motor.
(Note) It is not allowed for the user to
change the setting.
Motor This parameter is valid only in the
constant following conditional case:
(L coil)
(a) In case that SP034 (SFNC2) bit0=1
and SP034 (SFNC2) bit2=1
Set the motor constant of the L coil of
the coil changeover motor.
(Note) It is not allowed for the user to
change the setting.
265
Get other manuals https://www.bkmanuals.com
Details
Setting Standard
range setting
–32768 to 0
32767
–32768 to 0
32767
–32768 to 0
32767
(1/256-fold)
–32768 to 0
32767
(1/256-fold)
0000 to 0000
FFFF
HEX setting
0000 to 0000
FFFF
HEX setting