Example In Using A Rotation Axis As The Base Axis - Mitsubishi Electric MELDAS C6 Parameter Manual

9.4 Example in Using a Rotation Axis as the Base Axis

9.4 Example in Using a Rotation Axis as the Base Axis
Error
Division point number
Compensation Incremental
amount Absolute
In this case‚ the sum of the compensation amounts set according to the incremental system is
always 0. For the absolute system‚ the compensation amount at the terminal point (360 degrees) is
always 0.
9. Machine Error Compensation
#4123 #4124 #4125
−4
2 0
−4 −2 −2
277
Get other manuals https://www.bkmanuals.com
360°
#4126 #4127 #4128
−6
6 2
4 6 0
rdvno 4122
mdvno 4123
pdvno 4128