Mitsubishi Electric MELDAS C6 Parameter Manual page 24

# Items
1037 cmdtyp Command
type
1038 plcsel Ladder
selection
5. Base Specifications Parameters
Details
Specify the program G code series and compensation
type.
cmdtyp G code series
1 System 1 (for M)
2 System 2 (for M)
System 2 (for L)
3
System 3 (for L)
4
System 4
5
(for special L)
System 5
6
(for special L)
System 6
7
(for special L)
System 7
8
(for special L)
There are some items in the specifications that can be
used or cannot be used according to the value set in
this parameter.
The file structure may also change depending on the
compensation data type.
Thus‚ after changing this parameter‚ initialize the
system with "#1060 SETUP".
# (1060) DATA ( 1) (
↓
"BASE PARA SET? (Y/N)" : N
↓
"FORMAT? (Y/N)" : Y
↓
"SETUP COMPLETE"
(Note) The machining program is cleared with the
above operations. Back up necessary
machining programs in an external memory
before initializing.
Specify the PLC type.
18
Get other manuals https://www.bkmanuals.com
Compensation type
Type A (one compensation
amount for one compen-
sation number)
Type B (shape and wear
amounts for one compen-
sation number)
Type C (two kinds of
compensation amount of
shape and wear per
compensation No.)
Same as above
Same as above
Same as above
Same as above
Same as above
)
INPUT
INPUT
INPUT
Setting range (unit)
1 to 8
0 to 2