Honeywell Farenhyt Series Manual page 90

Programming Overview
Menu
Point Internal Power and
(cont.) External Power
5880/5865/ECS-
Series Amplifiers
90
Enter Pt /Select Function
Select Group or Zone Number
Edit Name
Enter Point #
Table 7.4 Programming Menus Quick Reference List (Continued)
Options/Defaults
Select UNUSED
Sensor
B NOTIF NOTIF OUTPUT Select
CONTROL
CIRCUIT
A NOTIF NOTIF OUTPUT Select
CONTROL
CIRCUIT
AUX PWR CONSTANT
AUX RESET
AUX DOOR
AUX SYNC
B SWITCH MANUAL PULL
WATER FLOW
FIRE SUPER-
VISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX 1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
MANUAL
RELEASE
INTERLOCK
STATUS POINT
ECS INPUT
ECS TAMPER
ECS SUPER-
VISORY
A SWITCH Same as B SWITCH
B 2-WIRE SMOKE
DETECT
4-WIRE SMOKE
CO 4 WIRE DET
A 2-WIRE SMOKE
DETECT
4-WIRE SMOKE
CO 4 WIRE DET
Enter Name
UNUSED
NOTIF NOTIFICATION OUTPUT
CONTROL CIRCUIT
IFP-300 Series Manual — P/N LS10145-001SK-E:C 4/6/2022
Programming Menu Quick Reference
Comments
Section 8.5
Group
Supervised
Yes or No
Group
Supervised
Yes or No
9
Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM
AUX2., ECS INPUT, ECS
TAMPER, and ECS
SUPERVISORY.
Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM
AUX2., ECS INPUT, ECS
TAMPER, and ECS
SUPERVISORY.
If ECS INPUT is selected choose
associated EVENT
Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM
AUX2., ECS INPUT, ECS
TAMPER, and ECS
SUPERVISORY
Section 8.5.3
Group or Zone selection will
appear depending on the
function selected
Section 8.5.4 and Section 8.5.6