Appendix A: Editing Text Using The Built-In Programmer; A.1: Characters Used For Editing Text; A.2: Example Name Edit - Honeywell Farenhyt Series Manual

Appendix A: Editing Text Using the Built-In Programmer

This section contains tables of programmable characters that may be used for device, module, site, template, group, and zone names or phone
numbers. T9 style editing is used.
A.1 Characters Used for Editing Text
Table A.1 lists the available characters and their associated numeric designator. When programming:
1. Use the Up or Down arrow key to scroll to the mode wanted.
2. Press the number shown in Table A.1 until the character wanted is shown.
3. Arrow left and right for position, and press enter to accept.
A.2 Example Name Edit
1. Press the up or down arrow to select upper case letters mode, Press 2 until "F" appears.
2. Press the up or down arrow to change mode to lower case letters, Press 3 until "i" appears.
3. Press 6 until "r" appears.
4. Press 2 until "e" appears.
5. Press 0 to space, then continue to next word using the same process.
6. Press ENTER to accept.
NOTE: After three seconds of no change, letter will automatically be accepted. Also pressing next number will automatically accept previous
choice.
IFP-300 Series Manual — P/N LS10145-001SK-E:C 4/6/2022
abc 1
mno 5
yz 9
ABC 1
MNO 5 PQR
YZ 9 Spc
Numbers and Special Characters
[ ]
1 1
5 ' " 5
9 = - 9
Table A.1 Character Table
<Module Name>
Fire Door
_ _ _ _ _ _ _ _ _ _ _
1[abc] 2[def] 3[ghi] 4[jkl]
6[pqr] 7[stu] 8[vwx] 9[yz ] 0[Spc]
Figure A.1 Edit Name Example
Lower Case Letters
def 2 ghi 3
pqr 6 stu 7
Spc 0
Upper Case Letters
DEF 2 GHI 3
6 STU 7
0
2 ( ) 2 3 . , 3
6 ? ! 6 7 ' / 7
0 0 * & @ *
Enter: Accept
5[mno]
jkl 4
vwx 8
JKL 4
VWX 8
4 : ; 4
8 – + 8
# $ #
163