Chassis Clearances - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

Chassis Clearances

Figure 130: CAB-HV-25A-SG-IN2 Power Cord and Plugs for the 3.5-kW HVAC/HVDC Power Supply
Table 31: 6-kW DC Power Supply Power Cord
Locale
All
Figure 131: Power Connector for the 6.0-kW DC Power Supply Unit
Chassis Clearances
You must provide each Cisco Nexus 7000 Series switch with adequate clearance for installation, maintenance,
cabling, and airflow. Installation clearance includes the cold aisle spacing required in front of the rack or
cabinet to allow you to move the switch with a mechanical lift to its rack or cabinet. Maintenance clearance
is the hot or cold aisle spacing required to replace supervisor, I/O, fabric, fan, and power supply modules.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
186
Part Number Cord Rating
N7K-DC-CAB 40 A, 48V-48V
Power Cord Reference Illustration
Figure 131: Power Connector for the 6.0-kW DC Power Supply
Unit, on page 186
Technical Specifications