Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 73

Installing a Cisco Nexus 7009 Chassis
Figure 27: Attaching the Left Door Stop
1 Align the left door stopper to the cable management
frame.
Step 2 Place two bushings on the vertical post located half way up the right cable management frame (see
Two Bushings on a Cable Management Frame Hinge Post, on page
the post.
2 Fasten the left door stopper to the frame with two M3 x 10
mm screws.
62). You must open each bushing to fit it around
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Front Door and Air Intake Frame
Figure 28: Placing
61