Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 83

Installing a Cisco Nexus 7010 Chassis
Unpacking and Inspecting a New Switch
Before you install a new Cisco Nexus 7010 chassis, you need to unpack and inspect it to be sure that you have
all the items that you ordered and verify that the switch was not damaged during shipment. If anything is
damaged or missing, contact your customer representative immediately.
Tip
To inspect the shipment, follow these steps:
SUMMARY STEPS
1. Compare the shipment to the equipment list provided by your customer service representative and verify
that you have received all of the ordered items. The shipment should include boxes for the following:
2. Check the contents of each box or package for damage.
3. If you notice any discrepancies or damage, send the following information to your customer service
representative by e-mail:
DETAILED STEPS
Step 1 Compare the shipment to the equipment list provided by your customer service representative and verify that you have
received all of the ordered items. The shipment should include boxes for the following:
• System chassis, which includes the following installed components:
• 2 supervisor modules
• 1 to 8 I/O modules
• 3 to 5 fabric modules
• 2 system fan trays
• 2 fabric fan trays
• 2 to 3 power supply units
The power supply units are shipped with the chassis but are boxed separately.
• Cisco Nexus 7010 system accessory kit
To see a list of what is in the accessory kit, see the Cisco Nexus 7010 System Accessory Kit Contents document, which
is included in the kit.
• Mid-chassis doors and frame (optional)
• Air filter (optional)
Step 2
Check the contents of each box or package for damage.
Do not discard the shipping container when you unpack the Cisco Nexus 7010 system. Flatten the shipping
cartons and store them with the pallet used for the system. If you need to move or ship the system in the future,
you will need these containers. For repacking instructions, see
Series Switch for Shipment."
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Unpacking and Inspecting a New Switch
Appendix E, "Repacking the Cisco Nexus 7000
71