Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 228

10BASE-X SFP+ Transceivers
Transceiver 8-port 10-Gigabit
(N7K-M108X2-12L)
SFP-H10GB-CU1-5M
SFP-H10GB-CU2M
SFP-H10GB-CU2-5M
SFP-H10GB-CU3M X
SFP-H10GB-CU5M X
18
The FET-10G transceiver is used only for connections with a Cisco Nexus 2248TP, 2248TP-E, 2232PP, 2232TM, and 2224TP
Fabric Extender (FEX).
19
Supported from Cisco NX-OS Release 8.1(1).
20
Requires the OneX Converter Module (part number CVR-X2-SFP10G) when this transceiver is used with the 8-port 10-GB
I/O module.
21
Requires revision 2 of this transceiver.
Figure 147: SFP+ Transceivers and FETs, on page 216
the cable specifications that apply to SFP+ transceivers and FETs, see
10-Gigabit SFP+ Transceivers and FETs , on page
Table 47: SFP+ Transceiver Optical Transmit and Receive Specifications , on page
specifications that apply to these transceivers, see
10-Gigabit SFP+ Transceivers and FETs , on page
Figure 147: SFP+ Transceivers and FETs
1
2
3
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
216
32-port
10-Gigabit
(N7K-M132XP-12)
Receive optical bore
Transmit optical bore
Clasp shown in closed position
32-port 10-Gigabit with 24-Port 10-Gigabit
XL option (N7K-M224XP-23L)
(N7K-M132XP-12L)
X X
X X
X X
X 3 X 3
X 3 X 3
identifies the major features of these transceivers. For
217. For the physical and environmental specifications, see
Table 48: Environmental and Power Specifications for the
218.
4 Clasp shown in open position
5 Dust plug
Transceivers and Module Connectors
48-Port 1-/10-Gigabit
(N7K-M348XP-25L)
X
X
X
X
X
Table 46: Cable Specifications for the
217. For the environmental