Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 74

Installing a Cisco Nexus 7009 Chassis
Installing the Front Door and Air Intake Frame
Figure 28: Placing Two Bushings on a Cable Management Frame Hinge Post
1 Split open the bushings and fit them around the cable management frame post.
Step 3
Assemble the two pieces of the right door stop over the bushings and post. Fasten the two pieces together with two M4
flathead screws (see Figure 29: Assembling the Right Door Stop, on page 63).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
62