I/O Module LEDs
LED
CMP STATUS (Supervisor 1
module only)
LINK (Supervisor 1 module
only)
ACT (Supervisor 1 module
only)
I/O Module LEDs
Table 65: I/O Module LEDs , on page 246
Table 65: I/O Module LEDs
LED
Status
ID
Flashing blue
Off
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
246
Status
Description
All diagnostics pass. The CMP is operational (normal initialization sequence).
Green
Amber
Sufficient power is not available for all modules.
Flashing amber
The diagnostic test has failed.
or
The CMP is not operational because a fault has occurred during the
initialization sequence.
Red
The module has detected a slot ID parity error.
Off
The CMP is not receiving power.
Green
The module has detected a link.
Off
The module has not detected a link.
The module is transmitting or receiving.
Flashing green
Off
The module is not transmitting or receiving.
Description
The operator has activated this LED to identify this module in the chassis.
This module is not being identified.
describes the I/O module LEDs.
Chassis and Module LEDs