40-Gigabit Cfp Transceivers - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

40-Gigabit CFP Transceivers

Product Number Transceiver Type
CPAK-100G-SR10 100GBASE-SR10
Table 37: Environmental and Power Specifications for CPAK Transceivers
Parameter
Storage temperature
Operating temperature
40-Gigabit CFP Transceivers
The following 40-Gigabit CFP transceivers are used with the M2-Series 100-Gigabit I/O modules
(N7K-M202CF-22L):
• CFP-40G-SR4
• CFP-40G-LR4
Figure 145: CFP Transceivers, on page 208
specifications that apply to these transceivers, see
on page
Specifications, on page
Specifications for CFP Transceivers, on page
Figure 145: CFP Transceivers
1 Thumb screws
2 Dust plug
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
208
Transmit Power (dBm)
–1.0 (maximum per
lane)–7.6 (minimum per
lane)
Specification
–40 to 185°F (–40 to 85°C)
32 to 158°F (0 to 70°C)
209. For the optical specifications, see
209. For the environmental specifications, see
3 Transmit optical bore
4 Receive optical bore
Receive Power (dBm)
2.4 (maximum per
lane)–9.5 (minimum per
lane)
identifies the major features of these transceivers. For the cable
Table 38: Cable Specifications for the CFP Transceivers,
Table 39: CFP Transceiver Optical Transmit and Receive
Table 40: Environmental and Power
209.
Transceivers and Module Connectors
Transmit and Receive Wavelength
(nm)
Ten lanes: 850 to 860 nm