Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 128

Installing the Front Door and Air Intake Frame
Figure 60: Attaching the Left Door Stopper
1 Left door stopper identified with an L on the bottom of the base.
2 Two M3x10 screws that fasten the stopper to the cable management
frame.
Step 2 Position the right door stopper (700-27592-01) on the middle of the right side of the cable management frame and
fasten it with two M3x10 pan-head screws as shown in
Tighten these two screws to 5 to 7 in-lb (0.6 to 0.8 N·m).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
116
3 Screw holes on the cable management
frame.
Figure 61: Attaching the Right Door Stopper, on page
Installing a Cisco Nexus 7018 Chassis
117.