Transceivers and Module Connectors
• DWDM-X2-xx.xx
• X2-10GB-CX4
• X2-10GB-ER
• X2-10GB-LR
• X2-10GB-LRM
• X2-10GB-LX4
• X2-10GB-SR
• X2-10GB-ZR
Additionally, you can use the following SFP+ transceivers with the OneX Converter Module (part number
CVR-X2-SFP10G) that adapts SFP+ transceivers to X2 ports:
• SFP-10G-SR
• SFP-H10GB-CUxM
For information on the SFP+ 10GB transceivers, see the
Transceivers, on page
Figure 148: 10-Gigabit X2 Transceiver (Latching Sleeve Not Extended), on page 219
features of the X2 transceivers, and
shows the transceiver with its latching sleeve extended (you pull the sleeve out to remove the transceiver from
the I/O module).
Figure 148: 10-Gigabit X2 Transceiver (Latching Sleeve Not Extended)
1
2
3
4
213.
Figure 149: X2 Transceiver with Latching Sleeve Extended, on page 220
Transmit optical bore
Receive optical bore
Latching sleeve (retracted)
EMI gasket
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-Gigabit X2 Transceivers
10-Gigabit SFP+ Transceivers and Fabric Extender
5
Transceiver heat sink
6
Module connector
7
Latch (extended when sleeve is retracted)
identifies the major
219