Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 14

Cisco Nexus 7004 Switch
Figure 1: Standard Hardware Features on the Front and Sides of the Cisco Nexus 7004 Chassis
1 Air intake areas for up to four AC or DC power
supplies
(N7K-AC-3KW/N7K-DC-3KW/N7K-HV-3.5KW)
or blank filler plates in place of missing power
supplies to maintain the designed airflow.
2 Cable management side frames
3 I/O or NAM modules (1 to 2 modules in slots 3
to 4).
4 Supervisor modules (1 or 2 modules in slots 1
and 2). These modules are of only one of the
following types (if installing two supervisor
modules, both modules must be the same type
with the same amount of memory):
• Supervisor 2 (N7K-SUP2)
• Supervisor 2 Enhanced (N7K-SUP2E)
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
2
5 Fan tray
6 Handles used for moving the chassis (reduce the
chassis weight to less than 120 lbs (54.4 kg) in
order to use these handles to lift the chassis)
7 Air intake areas for supervisor and I/O modules
Overview