Cisco Nexus 7018 System - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

Overview

Cisco Nexus 7018 System

Figure 7: Two Cisco Nexus 7010 Chassis Installed in a Four-Post Rack
Cisco Nexus 7018 System
The Cisco Nexus 7018 chassis has 18 slots that allow for two supervisor modules and up to 16 I/O modules.
The chassis also holds up to five fabric modules, two fan trays, up to four power supplies, and a cable
management system. The chassis also has a mounting bracket and four positioning handles (two on each side)
that you use to install the chassis after you position it on a rack. Optionally, you can include a front door to
protect the I/O cable connections.
Figure 8: Standard Hardware Features on the Front and Sides of the Cisco Nexus 7018 Chassis, on page 16
identifies the standard features on the front and sides of the Cisco Nexus 7018 chassis, Figure 9: Cable
Management System for the Cisco Nexus 7018 Chassis, on page 17 identifies the components of the cable
management system, Figure 10: Optional Front Door for the Cisco Nexus 7018 Chassis, on page 18 identifies
the optional feature on the front side of the chassis, and Figure 1-12 identifies the standard features on the
rear of the chassis.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
15