Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 138

Installing Storage Media in a Supervisor Module
Step 2
Wait for the reader or port LED to turn green and for a message to appear on the console as follows:
• If you are installing a card or USB drive into the log flash reader, the message will end with "logflash:online."
• If you are installing a card or USB drive into the expansion flash reader, the message will end with "slot0:online."
• If you see an "offline" message or do not see a message, either the card or USB drive is not fully inserted or it is
improperly formatted.
Make sure that the card or USB drive is fully inserted inside the reader. If it is fully inserted, either format the card
(see the Cisco Nexus 7000 Series NX-OS Fundamentals Configuration Guide) or replace the storage media with
another that is properly formatted for the reader.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
126
Installing a Cisco Nexus 7018 Chassis