Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 29

Overview
4 Supervisor modules (1 or 2 modules in slots 9
and 10). These modules are of only one of the
following types (if installing two supervisor
modules, both modules must be the same type
with the same amount of memory):
Figure 9: Cable Management System for the Cisco Nexus 7018 Chassis
1 System status LEDs (these LEDs show the
system status displayed by the chassis LEDs)
2 Top hood
• Supervisor 1 (N7K-SUP1)
• Supervisor 2 (N7K-SUP2)
• Supervisor 2 Enhanced (N7K-SUP2E)
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
8 Handles used to reposition the chassis (do not
lift the chassis with these handles—use a
mechanical lift)
3 Upper cable management assemblies
4 Lower cable management assemblies
Cisco Nexus 7018 System
17