Connecting Your Esd Wrist Strap To The Chassis - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

Installing a Cisco Nexus 7018 Chassis
Figure 53: Grounding Pad on the Cisco Nexus 7018 Chassis
1 Grounding
port
Step 5 Prepare the other end of the grounding wire and connect it to an appropriate grounding point in your site to ensure an
adequate earth ground for the switch. If the rack is grounded, connect the grounding wire as explained in the documentation
provided by the vendor for the rack.

Connecting Your ESD Wrist Strap to the Chassis

After you connect the chassis to the earth ground, you can ground your ESD wrist strap by plugging it into
the ESD port shown in
page
Figure 54: ESD Grounding Ports on the Front of the Cisco Nexus 7018 Chassis, on
108.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Connecting Your ESD Wrist Strap to the Chassis
107