Table of Contents
Advertisement
System Options
Phone Lines
To access the Phone Lines screen:
1.
Enter the Installer Code.
2.
Select 7 to access the Program Menu.
3.
From the Program Menu, select 5 to access the System Options.
4.
Select 1 to access the Communication Options.
5.
Select 2 to access the Phone Lines Menu.
6.
Select the phone line to be edited (1 or 2) by pressing the up or down arrow, then press ENTER.
Dialing Prefix
Enter up to 9 characters to be label the codes or the other terms (i.e., PBX dial-out codes, a pause, and so on. The following special characters
are available:
Use the number buttons on the annunciator or the up- and down-arrow keys to select special characters. Characters begin displaying after
"9". See Figure 9.9 for an example.
7.
Enter a dialing prefix (if needed), then press ENTER. Or, Press the right arrow to bypass the dialing prefix option.
Number of Answer Rings
This option is used in conjunction with the HFSS Honeywell Fire Software Suite. Use the option to determine the number of rings before the
panel answers a call from the computer. The Range is 00-15 rings. This option is factory-programmed as 06 rings, which should be compat-
ible for most installations, where the answering machine bypass feature is used. You may need to adjust it depending on the installation's
Telephone System.
The selections you enter must match the programming for this option in the Communication Configuration dialog box of the HFSS Honey-
well Fire Software Suite.
8.
Enter the desired number of answer rings, then press ENTER.
Dial Option (TouchTone or Pulse)
9.
Press the up or down arrows to select the dial option, then press ENTER.
Dial Option
PULSE
TT
TT/PL
Dial Format
10. Press the up or down arrows to select the pulse ratio to access the Rotary Dialing option, then press ENTER.
The options are:
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Figure 9.7 Phone Lines Editing Screen
#
*
,
If this option is selected, only pulse dialing will be used for this phone line.
TouchTone dialing. If this option is selected, only TouchTone dialing will be used for this phone line.
TouchTone alternating with pulse. If this option is selected, the communicator will first attempt to use TouchTone. It will
switch to pulse if TouchTone is not successful on the first attempt. It will continue to alternate between TT and pulse for
additional attempts.
U
U.S. standard format. Uses the 60 msec / 40 msec make/break ratio.
E
European format. Uses the 66 msec / 34 msec make/break ratio.
Pound (or number) key on the telephone
Star key on the telephone
Comma (character for 2-second pause)
Description
Table 9.6 Dial Options
Programming
99
Advertisement
Table of Contents
Troubleshooting
